Municipal Steel Structures

Have a need for a large steel structure as part of a public works project?

We've partnered with a large steel structure manufacturer so we can meet all your Park and Rec needs.

Clock tower

We have people in place who can bring your project all the way.

Custom Pavilion

Send us your "back of the envelope" sketch.

We will fill in the blanks.

A steel pavilion that resembles two arms

Custom Shade Shelter

We call this the Arms Pavilion.

Custom Steeltown Shade Shelter

A glorious eight sided custom, steel, shade pavilion

Huge pavilion that looks like half a barrel

Tapered Barrel Pavilion

This pavilion looks like half a barrel

Baldwin Pergoals did not build these structures, this section explains that we have the capability to design custom pavilion-like structures and to oversee the manufacture and installation of complex steel projects.

The rigidity of the pergola is derived from the stability of the connection to the Earth. The importance of big, solid footings which are placed accurately, cannot be overstated.

The rigidity of the pergola is derived from the stability of the connection to the Earth.
Concrete footings: 14" Diameter minimum for 10" square and 12" round columns.
Our site plan will show a diagonal dimension. This helps you square the footings to each other.
Concrete pad: Should be poured 12" deep in the area where the columns will stand.
Stone wall: It's best to drill 18" deep into the well built, mortared stone wall.
Concrete pier: Wet set our 5/8" stainless steel rods into the footing then build the pier
Tolerance factor: Footings should be placed accurately with an overall error margin of less than an inch.
Conduit in footings: Bring a sweep into your footing with the center about three inches off center.
Deck mounted: Ask us for PDF drawings of best practice connection methods.

It is the customers responsibility to make sure that an adequate mounting surface is in place. The customer is responsible for supplying relevant dimensions such as the depth and width of column centers and overall height requirements for the structure.

All dimensions, including overhangs and member spacing are completely customizable during the design process. At the time of installation, nothing can be changed.

Standing a column up onto a concrete footing. We previously drilled the footing and epoxied a 5/8" stainless steel threaded rod into the footing.

Gather Your Measurements

Measurements are taken from column centers, our typical overhang is 24 inches
A freestanding pergola that measures 120" x 120" on center will have an overall size of 168" x 168"
An attached pergola that measures 120" x 120" on center will have an overall size of 144" deep x 168" wide
All dimensions, including overhangs and member spacing are completely customizable

Use our Pricing Tool

Our pricing tool let's you design your pergola in real time and get an actual price
You will see a plan view CAD drawing of your pergola
You can consider our electrical options, a shade system and/or our installation service
follow this link to our Pricing Tool
You will have the ability to save your project into our database then share the link with your team for group collaboration

Your photos help us while desiging the best pergola

Send Us Photos

Your photos help us serve you better in the design phase
Please send us pictures of your proposed site and the exterior of your home
Pictures can be sent via email to sales@baldwinpergolas.com
...or via text to (860) 500-1741. Our pricing tool also allows one to upload photos and various file types

a picture of Mike setting up at an architecture show

Speak With Our Team

Once you have sent us your measurements and pictures we will reach out to you
Our project manager, Michael Hurlburt, will work out all of the important details
Once we have an understanding of your vision we will produce a set of drawings and a proposal
If you accept our proposal we require a 50% deposit to begin production

an electrician wiring lights into a pergola

Consider the Options

We offer a wide variety of options for you to consider
Decorative Details: We offer an array of column styles and rafter contours
Finishes: Custom colors are available, including color matched finishes
Electrical: We can factory prewire your structure to accommodate lighting, fans, heaters, and more

Confirm The Details

Review and confirm your pergola or pavilion drawings
Review your electrical and shade system options
Sign and return the proposal
Once a signed proposal is returned and a deposit is received, we will begin production

Testimonials

Thanks Max! I'll send you a picture today once we finish the install. It is truly AMAZING how well everything went together, especially considering the custom nature of the job and the need to build it against an existing structure.

Jonathan Sweet

Dear Baldwins, WE LOVE OUR NEW FURNITURE! It is so beautiful, comfortable and functional and it smells good too! We feel like we have a whole new outdoor room on our deck. Thank you for giving us a break on the delivery charges - the fellow who brought the furniture was a very nice young man. We're very happy with our choice. Sincerely,

Jane Hastay and Peter Weiss

Max - Thanks for the instructions on assembling the pergola - went together nicely and looks great in our small back yard! Regards, Charlie

Charlie Nicola

Chari, Thanks so much for working with us yesterday! My father dropped the chairs off to our home in Ri yesterday, and this morning we sat out there drinking our coffee discussing future home projects. Just wanted to share a photo of the chairs on our porch. While our porch is not quite completed, lattice, some garden work etc, the products we bought make our home that much nicer of a place to be and relax! Thanks again and have a happy Memorial Day!!

Calvin and Elizabeth Goodrich

Hi Chris, We love the pergola and all our neighbors think it is great. The Baims next door are seriously considering doing one next year. Thanks so much for all your help. Pat

Pat D'Auria

You are wonderful! The pergola is spectacular, and we are thrilled. We promise to send pictures of wedding guests enjoying our new "outside room." Thanks again.

Joe and Pat Pifko

Max and Chris, Just wanted you to know how pleased I am with the pent roof you designed and fabricated. The fit came out perfectly, installation was easy, it\'s performing as designed (including headroom for my daughter\'s 6\'7\" fiance), and looks great, of course. Many thanks! Best,

John Endicott

To Max and all the folks at Baldwin Pergolas who contributed to the creation and installation of our beautiful pergola - Thank you, thank you, thank you! Not only did you get the job done right on schedule and in time for our wedding, but the craftsmanship is impeccable. You are all very talented and deserving of great success.

Pat and Joe Pifko

You are wonderful. We sat in under the pergola each meal on Rosh Hashana and our guests said that they felt they were away at a beautiful restaurant or hotel!!

Dori Paul

Max, it does look spectacular in the evenings. One of these days, I'll try for a night photo that shows it off.

John Mitchell

"First, man defines his architecture. Forever after, his architecture defines him."

Municipal Steel Structures

Have a need for a large steel structure as part of a public works project?

We've partnered with a large steel structure manufacturer so we can meet all your Park and Rec needs.

Clock tower

Custom Pavilion

Custom Shade Shelter

Custom Steeltown Shade Shelter

Tapered Barrel Pavilion

Send us your plans »

The rigidity of the pergola is derived from the stability of the connection to the Earth. The importance of big, solid footings which are placed accurately, cannot be overstated.

The rigidity of the pergola is derived from the stability of the connection to the Earth.

Concrete footings: 14" Diameter minimum for 10" square and 12" round columns.

Our site plan will show a diagonal dimension. This helps you square the footings to each other.

Concrete pad: Should be poured 12" deep in the area where the columns will stand.

Stone wall: It's best to drill 18" deep into the well built, mortared stone wall.

Concrete pier: Wet set our 5/8" stainless steel rods into the footing then build the pier

Tolerance factor: Footings should be placed accurately with an overall error margin of less than an inch.

Conduit in footings: Bring a sweep into your footing with the center about three inches off center.

Deck mounted: Ask us for PDF drawings of best practice connection methods.

It is the customers responsibility to make sure that an adequate mounting surface is in place. The customer is responsible for supplying relevant dimensions such as the depth and width of column centers and overall height requirements for the structure.

All dimensions, including overhangs and member spacing are completely customizable during the design process. At the time of installation, nothing can be changed.

Standing a column up onto a concrete footing. We previously drilled the footing and epoxied a 5/8" stainless steel threaded rod into the footing.

Gather Your Measurements

Measurements are taken from column centers, our typical overhang is 24 inches

A freestanding pergola that measures 120" x 120" on center will have an overall size of 168" x 168"

An attached pergola that measures 120" x 120" on center will have an overall size of 144" deep x 168" wide

All dimensions, including overhangs and member spacing are completely customizable

Use our Pricing Tool

Our pricing tool let's you design your pergola in real time and get an actual price

You will see a plan view CAD drawing of your pergola

You can consider our electrical options, a shade system and/or our installation service

follow this link to our Pricing Tool

You will have the ability to save your project into our database then share the link with your team for group collaboration

Send Us Photos

Your photos help us serve you better in the design phase

Please send us pictures of your proposed site and the exterior of your home

Pictures can be sent via email to sales@baldwinpergolas.com

...or via text to (860) 500-1741. Our pricing tool also allows one to upload photos and various file types

Speak With Our Team

Once you have sent us your measurements and pictures we will reach out to you

Our project manager, Michael Hurlburt, will work out all of the important details

Once we have an understanding of your vision we will produce a set of drawings and a proposal

If you accept our proposal we require a 50% deposit to begin production

Consider the Options

We offer a wide variety of options for you to consider

Decorative Details: We offer an array of column styles and rafter contours

Finishes: Custom colors are available, including color matched finishes

Electrical: We can factory prewire your structure to accommodate lighting, fans, heaters, and more

Confirm The Details

Review and confirm your pergola or pavilion drawings

Review your electrical and shade system options

Sign and return the proposal

Once a signed proposal is returned and a deposit is received, we will begin production

Testimonials

It's been a tremendous honor to design and build these fantastic structures for our customers. We look forward to upcoming challenges and the beauty they bless us with.

Navigation

Contact Us